TP-LINK - TL-WR841ND (TP-LINK Firmware)
Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding
Some routers & modems work best with port forwarding if you have a static
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.
Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.
Need help finding you router IP address? Click here
Some router/modems require a username and/or password, if yours requires it, enter the routers username and password here.
If you don't know it you can check our list of default router and modem password list here.
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.
Once logged into your router click on the "Forwarding" and then "Virtual Servers".
Once the page loads click "Add New..."
In "Service port" enter the ports to be forwarded.
Example: 2100 or 3000-3100
In the "IP Address" field put the local IP of the computer the ports will be forwarded to.
Next select the protocol for the ports.
For "Status" choose Enable.
Repeat steps 4 & 5 for all ports.