Thomson - Speedtouch 510 (Thomson v5 Firmware)
Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding
Some routers & modems work best with port forwarding if you have a static
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.
Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.
Need help finding you router IP address? Click here
Some router/modems require a username and/or password, if yours requires it, enter the routers username and password here.
If you don't know it you can check our list of default router and modem password list here.
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.
Once logged into your router click on "Advanced" tab.
Under "Advanced" click on "NAPT"
Once the page is done loading, click on "New"
Select the protocol for the ports.
In the 'Inside IP' field put the local IP of the computer the ports will be forwarded to.
For "Outside IP" leave it 0.0.0.0
For "Inside Port" & "Outside Port" put the port you want to forward.
Click "Apply" to finish adding the new rule.
Repeat step 4 & 5 for all ports.