Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding
Step 1.
Some routers & modems work best with port forwarding if you have a static
local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download
my FREE Simple Static IP tool to set it for you.
Step 2.
Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your
router/modem properly.
Need help finding you router IP address? Click here
Step 3.
Some router/modems require a username and/or password, if yours requires it, enter the routers username and password here.
Next click "Login"
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.
Step 4.
Once logged into your router click on "NAT"
Once the page has loaded click on "Virtual Server"
Step 5.
Enter the computer IP address in "LAN Address"
Next choose the "Protocol Type" you wish to use.
Once the page has loaded check "Enable"
In "LAN Port" enter the starting ports to be forwarded.
Example: 2100 to 3500 or 2100,3600,8300 or a combination of ranges/multiple
ports.
In "Public Port" enter the ending ports to be forwarded.
Example: 2100 to 3500 or 2100,3600,8300 or a combination of ranges/multiple
ports.
Be sure to check "Enable"
Click on "Add"
Repeat step 5 for any more ports you want to forward.
All Done!
