Port Forwarding - Sitecom - WL-358 (Sitecom Firmware)

Sitecom - WL-358 (Sitecom Firmware)
Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Some router/modems require a username and/or password, if yours requires it, enter the routers username and password here.

If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.

Step 4.

Once logged into your router click on "Advanced Settings"

Wait for the page to load and click on "Port Forwarding"

Click To View Full Picture

Step 5.

Put a check on "Enable Port Forwarding"

Enter the computers IP address in "Local IP"

Next select your "Type"

Next for "Port range" enter in the ports you would like to forward.
Example: 3300 - 3300
Example: 3000 - 4000

Give the entry a name under "Comment"

Click on "Add"

Repeat this step for any more ports you need forwarded.

Once done click "Apply"

All Done!

Click To View Full Picture