Port Forwarding - D-Link - DIR-301 (D-Link Firmware)

D-Link - DIR-301 (D-Link Firmware)

Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

After you logged into the router click on "Advanced" link on the top of the page.

After that loads click on "Port Forwarding" on the left side of the screen.

Click to View Full Picture

Step 4.

Now click the Check Box to create a new rule.

For 'Name' give your new rule a name.

For 'IP Address' enter the IP of the computer you are forwarding to.

For 'Port' 'Start' enter the port number.

For 'Port' 'End' enter the port number.

For 'Traffic Type' select 'Any'.

For 'Schedule' select 'Always'.

Now click the 'Save Settings' Button to save your new rule.

Click To View Full Picture

All Done!