D-Link - Generic Guide 6 (All Models) (D-Link Firmware)
Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding
Some routers & modems work best with port forwarding if you have a static
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.
Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.
Need help finding you router IP address? Click here
Some router/modems require a username and/or password, if yours requires it, enter the routers username and password here.
If you don't know it you can check our list of default router and modem password list here.
If you have changed it and don't remember it you may have to reset your device to factory default using the reset button on most routers.
Once logged into your router click on the "Advanced Setup".
Once the page has loaded click on "NAT" then "Virtual Servers"
Once the page has loaded click "Add"
Choose the "Custom Server" option.
For "Custom Server" give your entry a name, it must not be the same as any others on this page.
Next enter the computers IP address in the "Server IP Address" field.
In "External Port Start" enter the port to be forwarded.
In "External Port End" enter the port to be forwarded. If a range enter the
Next select the protocol in "Protocol"
In "Internal Port Start" enter the port to be forwarded.
In "Internal Port End" enter the port to be forwarded. If a range enter the
Leave "Remote IP" blank.
Click To View Full Picture