Buffalo - WZR-HP-G300NH (Buffalo Firmware)


Port Forwarding Guide
For automatic port forwarding try Simple Port Forwarding

Step 1.

Some routers & modems work best with port forwarding if you have a static local IP.
Manually set your network interface card ( NIC ) to use a static ip address.
You can also download my FREE Simple Static IP tool to set it for you.

Step 2.

Open your favorite web browser and input your routers ip address in the address bar.
Please note that you must have the http:// in order to connect to your router/modem properly.

Need help finding you router IP address? Click here

Step 3.

Once logged into the router, click the 'LAN Config' Link at the top of the page.

Click to View Full Picture

Step 4.

Once the 'LAN Config' page loads click on 'Port Forwarding' link at the top of the screen.

Click To View Full Picture

Step 5

Select a 'Group' to add your new rule to, or go ahead and give one a name.

For Internet side IP address, use 'AirStation's Internet IP Address'.

For 'Protocol' Select the protocol you wish to use.

For the 'Port Number:' enter the port you want to forward.

For 'Lan Side IP Address' enter the IP address of the computer you are forwarding to.

For 'Lan Side Port' Enter the port number.

When finished Click the 'Add' button.

Click To View Full Picture

All Done!